- Sub-type
- Laminate
- Total thickness (mm)
- 9 mm
- Wear layer (hybrid/vinyl)
- —
- Veneer layer (timber)
- —
- AC/abrasion class (laminate)
- AC4 / Class 32
- Janka (timber)
- —
- Species/decor
- Oak (Painted Oak White) — representative; range spans multiple printed oak decors (Waxed, Painted, Soft Patina, Patina, Brushed Oak) plus a Merbau decor, all on HDF
- Plank width
- 212 mm
- Core/construction
- HDF core with melamine overlay; Uniclic glueless click, 4 sides
- Water resistance
- Water-repellent HydroSeal surface coating; carries a 15-year waterproof-surface warranty (residential). Water-resistant laminate — market the SURFACE as waterproof, not the whole floor.
- Warranty (res/comm)
- Lifetime (33 years) residential / commercial available on request; 15-year wet warranty
- Wear layer (microns)
- N/A — laminate durability is an AC abrasion class (EN 13329 Taber cycles), not a micron-measured PU/film wear layer. A micron figure is an LVT/vinyl metric; do not quote one for laminate.
- Plank length (mm)
- 1380 mm
- Locking system
- Uniclic glueless mechanical click, 4 sides; ISO 24334 locking strength long side >=1 kN/m, short side >=2 kN/m
- Installation method
- Floating install over a separate Quick-Step underlay, Uniclic angle-in click. Not glued, not nailed.
- Attached underlay
- None — no factory-attached pad; a separate Quick-Step underlay is required.
- Slip resistance (AS 4586)
- AS 4586 pendulum per decor: P1 Waxed Oak; P1 Painted Oak; P2 Merbau; P3 Soft Patina Oak; P3 Patina Oak; P4 Brushed Oak
- Fire – CRF + smoke (AS ISO 9239.1)
- —
- VOC / formaldehyde (class + cert)
- Formaldehyde E1 (EN 717-1) <0.01 ppm (vs E1 norm <0.1); French VOC A+ (AFFSET); anti-static EN 1815 <=2.0 kV; certs: PEFC/07-32-37, M1, Nordic Ecolabel 30290001, Singapore Green Label 035-098-1422, U-zeichen z-156.606-996; CE/DoP
- Underfloor heating
- Suitable for low-temperature underfloor heating on a Quick-Step underlay (floating install), per special installation instructions. Plank thermal resistance 0.055 m2K/W (EN 12996). (The 27C / <=0.15 m2K/W / +5C-per-day ramp / Thermolevel limits are NOT on the AU TDS — verify in the AU installation guide before publishing.)
- Bevel / edge profile
- Genuine bevel, 4 sides
- Surface texture / finish
- Embossed melamine wear overlay with Scratch Guard (scratch charge >=5N vs >=3N norm; up to ~10x more scratch-resistant), wood-grain/in-register embossing. Light fastness Class 8 (EN ISO 105-B02); anti-static <=2.0 kV (EN 1815). 'Predominantly matt' is a per-decor design descriptor.
- Impact sound (IIC)
- N/A at plank level — no attached acoustic pad, so impact-sound reduction comes from the SEPARATE underlay chosen, not the board. No IIC (AS/US) figure published; European ΔLw (ISO 717-2) with a Quick-Step underlay ~18 dB (range ~16-21 dB depending on underlay). Quote the chosen underlay's rating, not a plank value.
- Country of origin
- —
