- Sub-type
- Laminate
- Total thickness (mm)
- 9.5 mm
- Wear layer (hybrid/vinyl)
- —
- Veneer layer (timber)
- —
- AC/abrasion class (laminate)
- AC4 / Class 32
- Janka (timber)
- —
- Species/decor
- Printed wood-look laminate decors (oak-dominant): Woodland Oak, Desert Oak and Valley Oak, plus Australian-species prints Blackbutt and Spotted Gum — decorative reproductions on HDF, not solid timber.
- Plank width
- 240 mm
- Core/construction
- HDF core, Uniclic 4-sided click
- Water resistance
- Water-repellent HydroSeal surface; AU TDS backs a 15-year waterproof-surface warranty
- Warranty (res/comm)
- 25 years residential / commercial available on request
- Wear layer (microns)
- N/A — laminate durability is an AC abrasion class (EN 13329 Taber cycles), not a micron-measured PU/film wear layer. A micron figure is an LVT/vinyl metric; do not quote one for laminate.
- Plank length (mm)
- 2050 mm
- Locking system
- Uniclic glueless mechanical click (patented), 4 sides. Locking strength ISO 24334: >=1 kN/m long side, >=2 kN/m short side.
- Installation method
- Floating floor over a separate Quick-Step underlay (angle-in Uniclic click); not glued, not nailed.
- Attached underlay
- None — no factory-attached pad; a separate Quick-Step underlay is required (laid first, taped between rows).
- Slip resistance (AS 4586)
- P2 (Desert Oak / Valley Oak surfaces); P3 (Woodland Oak surfaces) — AS 4586 pendulum.
- Fire – CRF + smoke (AS ISO 9239.1)
- CRF 10.8 kW/m2, smoke 4% (AS ISO 9239.1); burning-cigarette EN 438-2 Class 5.
- VOC / formaldehyde (class + cert)
- Formaldehyde class E1 (EN 717-1), measured <0.01 ppm vs E1 norm <0.1. French VOC label A+ (AFFSET). CE-marked. Certs: PEFC (PEFC/07-32-37), M1, Nordic Ecolabel (30290001), Singapore Green Label (035-098-1422), U-zeichen z-156.606-996. Anti-static EN 1815 <=2.0 kV.
- Underfloor heating
- Compatible with low-temperature underfloor heating (and cooling) on a Quick-Step underlay (floating install). Plank thermal resistance 0.065 m2K/W (EN 12996). Follow Quick-Step's special floor-heating installation instructions.
- Bevel / edge profile
- Genuine bevel, 4 sides.
- Surface texture / finish
- Embossed melamine wear overlay, predominantly matt wood-grain, with Scratch Guard (scratch charge >=5N vs >=3N norm). Light fastness Class 8 (EN ISO 105-B02); anti-static <=2.0 kV.
- Impact sound (IIC)
- N/A at plank level — no attached acoustic pad, so impact-sound reduction comes from the SEPARATE underlay chosen, not the board. No IIC (AS/US) figure published; European ΔLw (ISO 717-2) with a Quick-Step underlay ~18 dB (range ~16-21 dB depending on underlay). Quote the chosen underlay's rating, not a plank value.
- Country of origin
- —
