- Sub-type
- Laminate
- Total thickness (mm)
- 8 mm
- Wear layer (hybrid/vinyl)
- —
- Veneer layer (timber)
- —
- AC/abrasion class (laminate)
- AC4 / Class 32
- Janka (timber)
- —
- Species/decor
- Printed decor reproduction on HDF (varies by product); predominantly oak looks (Classic/Soft/Ivory/Cotton/Almond/Truffle/Dune Oak) but also Australian species looks e.g. Blackbutt and Spotted Gum. Not real timber.
- Plank width
- 190 mm
- Core/construction
- HDF core (laminate)
- Water resistance
- HydroSeal waterproof-surface coating (water-repellent); surface treatment, not a fully waterproof board
- Warranty (res/comm)
- Lifetime/33-year residential (15-year wet) / commercial on request
- Wear layer (microns)
- N/A — laminate durability is an AC abrasion class (EN 13329 Taber cycles), not a micron-measured PU/film wear layer. A micron figure is an LVT/vinyl metric; do not quote one for laminate.
- Plank length (mm)
- 1380 mm
- Locking system
- Uniclic glueless mechanical click (patented), 4 sides. Locking strength ISO 24334 >=1 kN/m long side, >=2 kN/m short side.
- Installation method
- Floating floor over a separate Quick-Step underlay (Uniclic angle-in click); not glued, not nailed.
- Attached underlay
- None - no factory-attached pad. A separate Quick-Step underlay is required (impact-sound and floor-heating ratings depend on the chosen underlay).
- Slip resistance (AS 4586)
- P2 on saw-cut decors (IM1858 / IM3105); P3 on all other decors (AS 4586 pendulum).
- Fire – CRF + smoke (AS ISO 9239.1)
- —
- VOC / formaldehyde (class + cert)
- Formaldehyde class E1 (EN 717-1), measured <0.01 ppm (E1 norm <0.1); French VOC label A+ (AFFSET); CE-marked (also M1, Nordic ecolabel, PEFC, Singapore Greenlabel).
- Underfloor heating
- Suitable with low-temperature underfloor heating on a Quick-Step underlay (floating install); plank thermal resistance 0.055 m2K/W (EN 12996). Per Quick-Step floor-heating install instructions: max floor surface temp 27C and total floor+underlay resistance <=0.15 m2K/W.
- Bevel / edge profile
- Genuine bevel, 4 sides (pressed).
- Surface texture / finish
- Embossed melamine wear overlay with Scratch Guard (scratch charge >=5N vs >=3N norm; 'up to ~10x more scratch-resistant' per brand page). Light fastness Class 8 (EN ISO 105-B02); anti-static <=2.0 kV (EN 1815).
- Impact sound (IIC)
- N/A at plank level — no attached acoustic pad, so impact-sound reduction comes from the SEPARATE underlay chosen, not the board. No IIC (AS/US) figure published; European ΔLw (ISO 717-2) with a Quick-Step underlay ~18 dB (range ~16-21 dB depending on underlay). Quote the chosen underlay's rating, not a plank value.
- Country of origin
- Made in Belgium (manufacturer Unilin)
