- Sub-type
- Laminate
- Total thickness (mm)
- 12 mm
- Wear layer (hybrid/vinyl)
- —
- Veneer layer (timber)
- —
- AC/abrasion class (laminate)
- AC5 / Class 33
- Janka (timber)
- —
- Species/decor
- Oak decor - Soft Oak Grey
- Plank width
- 190 mm
- Core/construction
- HDF core; Uniclic glueless mechanical click, 4 sides
- Water resistance
- HydroSeal waterproof-surface coating (backed by 15-year waterproof-surface warranty)
- Warranty (res/comm)
- Lifetime (33 years) residential / commercial available on request; 15-year wet warranty
- Wear layer (microns)
- N/A — laminate durability is an AC abrasion class (EN 13329 Taber cycles), not a micron-measured PU/film wear layer. A micron figure is an LVT/vinyl metric; do not quote one for laminate.
- Plank length (mm)
- 1380 mm
- Locking system
- Uniclic patented glueless mechanical click, 4 sides. Locking strength ISO 24334: >=1 kN/m long side, >=2 kN/m short side
- Installation method
- Floating floor (Uniclic angle-in click) laid over a separate underlay; not glued, not nailed
- Attached underlay
- None - no factory-attached pad; a separate Quick-Step underlay is required (castor-chair and floor-heating ratings stated 'with underlay' / 'on a Quick-Step underlay')
- Slip resistance (AS 4586)
- P2 (saw-cut decors IMU1858/IMU3105) / P3 (all other decors) - AS 4586 pendulum test
- Fire – CRF + smoke (AS ISO 9239.1)
- —
- VOC / formaldehyde (class + cert)
- Formaldehyde E1 (EN 717-1), measured <0.01 ppm vs E1 norm <0.1; anti-static EN 1815 <=2.0 kV; CE-marked. Certificates: French VOC (AFSSET) A+, PEFC PEFC/07-32-37, Nordic Ecolabel 30290001, Singapore Green Label 035-098-1422, M1, U-zeichen z-156.606-996
- Underfloor heating
- Suitable over low-temperature underfloor heating on a Quick-Step underlay (floating). Max floor contact temperature 27C; total thermal resistance (floor + underlay) must not exceed 0.15 m2K/W; plank thermal resistance 0.055 m2K/W (EN 12996). Not compatible with the Thermolevel underlay.
- Bevel / edge profile
- Genuine bevel, 4 sides (pressed)
- Surface texture / finish
- Embossed melamine wear overlay, predominantly matt, with ScratchGuard (scratch charge >=5N vs >=3N norm). Light fastness Class 8 (EN ISO 105-B02); anti-static <=2.0 kV (EN 1815).
- Impact sound (IIC)
- N/A at plank level — no attached acoustic pad, so impact-sound reduction comes from the SEPARATE underlay chosen, not the board. No IIC (AS/US) figure published; European ΔLw (ISO 717-2) with a Quick-Step underlay ~18 dB (range ~16-21 dB depending on underlay). Quote the chosen underlay's rating, not a plank value.
- Country of origin
- Made in Belgium (Unilin)
